USER MANUAL M-BTP50.B M-BTP50.
Table of contents EN Warranty Specifications Product overview Charge the battery Indicator LED status Switch On/Off Pairing and connecting with a Bluetooth device Re-connecting with a Bluetooth device Disabling the Bluetooth connection Adjust the Volume Listen to music Auxiliary input USB charging port Product care Package contents -2- 3 3 4 5 5 5 6 6 6 6 7 7 8 8 8
EN Warranty Thank you for purchasing this Macrom product. Should your product need warranty service, please return it to the shop where you buy it or to the Macrom distributor in your country. The warranty does not cover damage due to improper use and or installation, incorrect connections to power supply and audio video sources, exposure to excessive humidity, unauthorized repair attempts or modifications. Specifications M-BTP50 can play music from a compatible music player.
EN Product overview Volume down Power ON/OFF/Play/Pause Volume up Battery indicator LED Bluetooth indicator LED DC IN16V Auxiliary Input USB port -4-
EN Charge the battery Connect the supplied AC adapter to the back of M-BTP50. Plug the supplied AC adapter into a wall power outlet to begin charging M-BTP50’s internal battery. The battery indicator LED is steady orange while charging and will turn off when the battery is fully charged. For a faster charge please remember to power off the unit before charging the battery. Full charge time is approx 4 hours. When fully charged the battery operation time is approximately 10 hours at 60% playback level.
EN Pairing and connecting with a Bluetooth device Power on the M-BTP50. The blue LED blinks. From the Bluetooth function of the device to be paired search for new device named “M-BTP50”. Select it and if requested enter “0000” passcode. When pairing is completed successfully the pairing indicator LED is blue steady and the unit prompts two tones. If the pairing procedure is not successful, please switch off the unit and repeat the above steps.
EN Listen to music Connect the unit to a compatible music player that supports A2DP profile. To play or pause key. music from the unit short press Auxiliary input To connect a device to the auxiliary input use the cable provided with the unit. If a connector is plugged in the auxiliary input the Bluetooth function is automatically disabled. Bluetooth functions is automatically resumed when the connector is removed from the auxiliary input.
EN USB charging port M-BTP50 includes a USB port on the back to allow you to charge a mobile device. Plug M-BTP50 into a wall outlet and then connect your device to the USB port using USB cable (not included). Note: The charging of mobile devices using the USB port is only allowed if the M-BTP50 is plugged into a wall outlet.Power output of the USB port is 500mA. Media devices that require more power may not charge through this USB port.
The BLUETOOTH ® worldmark and logos are registered trademarks owned by the Bluetooth SIG, Inc and any use of such marks by ALDINET S.p.A. is under license. The MACROM brand is a registered trademark of ALDINET S.p.A. Declaration of Conformity ALDINET S.p.A Viale C. Colombo, 8 - 20090 Trezzano s/N (MI) - Itlaly Tel. +39 02 484781 w w w . m a c r o m .