Operation Manual

Pairing and connecting with a Bluetooth device
Every time the unit is switched on, it will connect to the last connected device automatically
and the unit prompts two tones when is connected.
Power on the M-BTP50. The blue LED blinks. From the Bluetooth function of the device to
be paired search for new device named “M-BTP50”. Select it and if requested enter “0000”
passcode. When pairing is completed successfully the pairing indicator LED is blue steady
and the unit prompts two tones. If the pairing procedure is not successful, please switch off
the unit and repeat the above steps. The specific pairing procedure may vary, so please refer
to your device user manual for further information.
Re-connecting with a Bluetooth device
To adjust the unit volume while listening to music press the volume up or down keys.
Adjust the Volume
-6-
EN
To unpair a Bluetooth device that is already connected, turn off bluetooth connection on the
connected device. The M-BTP50 will be in pairing mode.
Disabling the Bluetooth connection