English M-DVD5561R DVD RECEIVER 6.
Precautions 1. Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop / dealer for inquiry. 2. If the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the applicant. 3 .
Declarations Manufactured under license from Dolby Laboratories. Dolby Digital: “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Dolby Digital and Dolby Pro Logic II(x): “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Dolby Digital and MLP Lossless: “Dolby”, “MLP Lossless”, and the double-D symbol are trademarks of Dolby Laboratories.
Contents Before using Front panel . .. .. .. . . . . . . . . . 01 Pause..................... 11 Remote control............. 02 Stop...................... 11 Fast rewind / Fast forward..... 11 Basic operations Play the next or previous file... 11 Power on/off.. .. .. . . . . . . . . . .04 Repeat playback ............ 11 MUTE. . . . . . . . . . . . . . . . . . . . .04 Repeat A-B ................ 12 Adjust the volume...........04 Random playback .......... 12 Main menu/Source menu DVD menu/title..
Contents Voice transfer.. .. .. . . . . . . . . 18 Hang u p................... 18 Scan phone book.. . . . . . . . . . 18 Look for calling record .......19 Play music................. 19 DVB-T................... 20 iPod mode............... 21 Other modes AUX...................... 22 Rearview . . . . . . . . . . . . . . . . . . 22 NAVIGATION . .. .. . . . . . . . . . . 22 Wall paper................. 22 SETUP Setup steps. . . . . . . . . . . . . . . . 23 Time. . . .. .. .. .. .. . . . . . . . . . 23 GPS.. .
Before using Front panel M-DVD5561R 8 1.[NAV] key: Enter the GPS navigation system or exit 2.[MENU] key: Return to the home menu 3.[ 4.[ ] key: Turn on/off the screen brightness and enter the nighttime mode / ] knob: ajust volume Turn mute on/off(short press) Turn the unit on or off(long press) 5. Open the cover and insert/remove the GPS map card 6. USB slot 7. AV jack 8. [Reset] key: Reset the unit 9. [ ] key: Eject disc 10. Disc slot 11.
Before using 3 AMS SRC MODE POWER TITLE MENU ANGLE SUBTITLE BAND GOTO REPT A-B REPT SETUP SEL OSD RDM 8 3 18 ZOOM PROG VOL OK 8 MUTE AUDIO 10+ 18 02 Radio preset scan/Radio auto preset Select the following sources: RADIO DISC GPS iPod USB B-T DVB-T AUX1 AUX2 Switch to the current playbck source and the main menu(DVD) Power on/off Select the title of DVD Main menu(DVD) Select angle Select subtitle Radio band Search and play Repeat A-B Repeat Enter to the system setup Enter the E
Before using Notes of remote control using 1) Aim the remote control at the remote sensor on the unit. 2) Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3) DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly. 4) The battery can work for 6 months under normal condition. If the remote control can't work, please change the battery.
Basic operations Power on/off Turn on : short-press [ ] knob in the front panel or [POWER] in the remote control； Turn off: after being turned off by long-pressing [ ] in the front panel . MUTE ] knob in the front panel or [ MUTE ] key in the remote control, to Short-press [ shut the audio output from system. Notice： (1)If it was muted already, repeat the former action or tune volume to cancel the former muting .
Radio mode Select Radio mode Enter Main Menu and choose [ RADIO ] mode. 00:12AM P1 Radio 87.50 BAND P1 P2 P3 87.50 90.00 98.00 P4 P5 P6 106.00 108.00 87.50 LOC SCAN Select band Press [BAND]in the remote control, [FM/AM] in the front panel or [BAND] in the user interface, to choose a band among FM1, FM2, FM3, AM1 and Am2. Auto tuning ]/[ ] in the front panel, searching for a station along the Short press [ reduse/increasing frequencies.
Radio mode EQ selection Press the icon and enter the EQ setup . Recall the preset stations When you want to listen the store station,select the P1-P6 on the list and fleetly listen to the station. 00:12AM P1 Radio 87.50 BAND P1 P2 P3 87.50 90.00 98.00 P4 P5 P6 106.00 108.00 87.
RDS mode The unit provides basic functions of RDS, including AF (Alternative Frequency), TA (Traffic Announcement) and PTY (Program Type) Selection. AF function Alternative Frequencies Lists are used for the same program service and used in conjunction with the PI code (Program Identification code)to assist automatic tuning. Using this information, a radio can automatically search out another station that is playing the same material. This is useful when the station you are listening to is fading out.
DVD mode Insert a disc Upon inserting a disc, the unit will switch to [DISC] mode automatically. Notes: ① Please confirm whether there is a disc in the unit before you insert another one. ② Some recorded discs, such as CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW cannot be played back because of different recording status. Otherwise, the discs without being closed could not be played back. ③ About the cautions of disc using, please refer to the appendix. ④ Don't pledge to support all kinds of disc.
DVD D V D播mode 放源 Onscreen control icons Disc type MP3/WMA Icon CD VCD DVD Picture Numeric keypad Numeric keypad Numeric keypad Numeric keypad Numeric keypad Display Setting Display Setting Display Setting Display Setting Display Setting Fast forward Fast forward Fast forward Fast forward Fast rewind Fast rewind Fast rewind Fast rewind Previous Previous Previous last content last picture Next Next Next Next content Next picture Play / Pause Play / Pause Play / Pause Play
DVD mode Continued Disc type MP3/WMA Icon CD VCD DVD MENU PBC MENU PLAY ZOOM ZOOM ZOOM ANGLE ANGLE OSD display playback information Channel switching AUDIO MUSIC Music file PHOTO Picture file VIDEO Vedio file Picture(picture in disc can't be read) ZOOM Channel switching Picture file Random Notice: “return the last menu”icon is always on the fixed position， but may turn different flash and icon at different source.
DVD mode Play Insert the disc into the disc slot with label side facing up and play starts automatically. Pause When play the audio/vedio file,press the to stop and the top left corner of screen shows[stop ], press the icon again and continue to play. Stop For audio files, press the icon to stop, and the screen will display [PRE ] on the upper left corner. Press to resume from the pausing point. Press the icon again to stop entirely, and the screen will display [STOP ] on the upper left corner.
DVD mode Repeat A-B When a DVD, VCD or CD disc is played back, you can play back the contents between the time points from A to B repeatedly: REPEAT A- REPEAT B- A- B CANCEL Random playback You can play audio tracks/files in random order. During play CD ,touch repeatedly to turn random play on or off. is highlighted: start random play turns gray: cancel random play Notice:when the [random] turn off,the unit resume natural play from the current sequence.
DVD mode Select a particular file During playing the DVD disc,touch anywhere except for the upper left corner to display menu on the screen.
DVD mode Playback information Touch the top center area of TFT LCD when playing back DVD and VCD discs and the playback information will be displayed on the top area of the TFT. Notice: Only when open the [OSD] mode. 1、For DVD: DVD TT 1/11 CH 2/13 1 2 3 00: 01: 34 4 (1) Disc type. (2) DVD Title information. “1 /11 ” indicates that this DVD has11 titles and the title playing back now is the first title. (3) DVD Chapter information.
USB mode Open the source menu and then select [ USB ] mode . Notice: 1. If there are audio files supported in the USB stick, the system will enterthe audio files menu automatically. If there are no audio files, but there are video files supported in the USB stick, the system will enter the video files menu automatically. If there are no audio or video files, but there are picture files supported in the USB stick, the system will enter the picture files menu automatically.
USB mode Playback information display In the video full screen mode, press the [KEY] icon under the screen, the display control menu will appear. Press the [ OSD ] icon to select the playing back information display on the upper of screen. Rotate picture Press anywhere on the screen except the upper left corner, the display control menu will appear. Press the [ ANGLE] icon to select you desired angle to view.
Bluetooth mode Bluetooth is a wireless transmission way for short distance. The built-in bluetooth can connect with the mobile phones having bluetooth function. After connecting, you can control your mobile phone through the unit. Icon Function Icon Function Icon Function Previous Auto Connect Phone book Change Re - dial Next Auto Answer Ans./Dial Play/Pause Call Record Hangup Delete Notice: Comprehensive compatibility to all Bluetooth units is not guaranteed.
Bluetooth mode Auto answer By default,all incoming calls are received automatically. Touch the icon turns bright , if there is incoming call , the call will switch to the mobile telephone automatically and display the phone number . Touch the icon turns gray , if there is incoming call , you need to answer the call . Auto Answer Auto Answer Make a call By default,you can make a call by mobile telephone、screen keyboard、mobile telephone taiking note or phone note.
Bluetooth mode Look for call record Call Touch the Record icon on the bluetooth interface to enter the menu,then the menu list displays five options:Delete One、Delete All、Received Call、Missed Call、Dialed Call,touch the anyone to the menu. If you want to exit the menu,touch the [ ].
DVB-T mode Factory Default 20
iPod mode Select iPod as playing source Current source will switch to [ iPod ] automatically , after the stable connection between the unit and the iPod player is constructed . iPOD Composers Repeat Shuffle MODE Operation : 1 . Operate the main menu before the screen is not 、 2 . Press the icon 、 3 . Press the icon the last menu. 4.Press the top left corner OK by pressing the icons on the left side of screen , full screen . to select file , touch the icon to play . icon to return to p revious or next.
Other modes AUX External peripheral devices with RCA audio and video outputs can be connected with the unit. For more details,please refer to( Electrical Connections Overall Diagram). Open the 'SOURCE MENU',and select 'AUX-1' or 'AUX-2'to enter AUX IN mode. REARVIEW The reaview camera can be connected with the unit. For more details,please refer to (Electrical Connections Overall Diagram). 1.Manual mode Open the "SOURCE MENU", and select "BACK VIEW"mode. 2.
SETUP Setup Steps 1.Enter setup menu Press the [SETUP] icon on the main menu,the setup main menu shown as below: SETUP General Time GPS Illumination setup Radio Video Red Reset setting Calibration Volume Blue OK Version 2.Setup Illumination setup Repeatedly press the Reset setting Red or Blue on the screen to select the lamplight. Press the [OK] on the screen to start to reset the unit. Version The current version of the unit.
SETUP GPS After the map card is inserted , press the [ GPS ] icon on the main source menu to enter navigation system . The path is default , shown as below : SETUP General Time GPS Radio Video Calibration Volume OK Notice: The path of the map stored for your reference.To access GPS mode,you can press the[NAV] button on the front panel or press the [GPS]icon on the main menu. Radio Press the [ Radio ] icon on the setup menu to enter radio mode .
SETUP Calibration When the touch operation is not sensitive or valid,you should calibrate the touch screen through TS CAL Screen function. SETUP General Time Radio GPS Video Do you want to Calibrate? Calibration Volume OK Press the [Calibration] icon on the setup menu to enter. 1.The information appears on the screen: Whether calirate the touch screen? OK 2.Start calibrating Use a pointed object to touch the center of [ ],the [ ] will move automatically. 3.
EQ Audio control allows you to easily adjust the audio system to get the best possible sound effect. Procedures of EQ setup 1.Enter EQ setup mode Press the icon on the user interface. Audio TRE BASS SUB FREQ:OFF SUB OUT EQ:USER LOUD:OFF 2.Select EQ mode a.There are following equalizer options: USER/POP/ROCK/CLASS. Press to select. b.Select a crossover frequency: 80Hz/120Hz/160Hz/OFF. C.Select loudness on or off.Press to select.
Troubleshooting What appears to be trouble is not always serious. Please check the following points before calling a service center. Problem Cause Corrective action General Unit can not power on Remote control does not work No/low audio output Poor sound quality or distortion Tel-Mute malfunction Unit fuse blown. Install new fuse with correct rating. Car battery fuse blown. Install new fuse with correct rating. Illegal operation Reset the unit. Battery depleted. Change the battery.
Troubleshooting (Continued) Problem Cause Corrective action Disc playback Cannot insert disc Disc does not play back A disc inside the unit already. Eject current disc and insert new one. Disc is warped or scratched. Use disc in good condition. Disc is dirty or wet. Clean disc with soft cloth. Incompatible disc is used. Use compatible disc. Disc is inserted upside down. Insert disc with label side up. Disc region code is not compatible with unit. Use disc with proper region code.
Device connections Notes of connection This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install a transformer by professional to convert the output voltage to 12V. To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
Device connections Control Cables Auto Brightness Control To avoid the display being too bright at night time, if the headlight cable is connected to ILLUMI, turning on the headlight will dim the backlight of the TFT LCD and vice versa. Telephone Mute If the MUTE cable is connected to a car phone, other audio outputs mute when one call is received by the car phone.
Device connections Parking Brake Cable Connections Parking Brake Lead Green Wire 2A Battery Brake Light Parking Brake Switch Car Frame Parking Brake Switch Reverse Driving Cable Connections Reverse Driving Signal Light Car Frame Pink Cable Reverse Driving Cable Car Battery P R N D 2 L Gearbox 31 Car Frame
Specifications Geneal Reference Supply Voltage............................................................. 12V(DC) Operating Voltage Range..................................................10.5～15.8V(DC) Max Operating Current..........................................................................15A Grounding System................................................Car Battery Negative Pole Dimensions(WXHXD)......................................................178X100X173mm Weight(main unit).................
Specifications Environment Operating Temperature............................................................-10℃~＋60℃ Storing Temperature................................................................-20℃~＋70℃ Operating Humidity.................................................................45%~80%RH Storing Humidity.....................................................................
Specifications Region code According to DVD sale region, the whole world is divided into six regions. A DVD disc can be played back only when its region code is compatible with that of the player in use.
CAMERA YELLOW Notice: 35 P R N D 2 L Gearbox CAR CAMERA-VIDEO YELLOW GREEN connect the AV cable to the AV IN socket on the front panel. BATTERY(+) GND ACC MUTE ILLUME ANT.
P/N:127075002658
