NAVIGATION MULTIMEDIA RECEIVER INSTRUCTION MANUALS
Thank you for buying this product, please read through these operating instructions, so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. CONTENTS ACCESSORIES ....................................................................................................................................................... 2 PRECAUTIONS .....................................................................................
ACCESSORIES Mounting Bracket (Half Sleeve) X1 Removable Trim Ring equipped on the unit X1 Mounting Screw M5 X1 Rubber X1 Remote Control X1 Mount Strap X1 Wire connector X1 User manual X1 AV in cable X1 Screws(M5X6) X4 Screws(M24) X1 Release key X2 Washer X1 Desiccant X1 GPS antenna X1 GB-2
PRECAUTIONS 1. 2. 3. 4. 5. 6. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicles electrical system. Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body. Make sure all the connections are completely correct before turning on your unit.
To enjoy optimum sound and images while playing, handle the discs as follows: - Handle the disc by its edge to keep the disc clean, and do not touch the surface. PRECAUTIONS This unit can play the following discs only: - do not use your disc with paste residue or ink attached. - does not use disc with labels or stickers attached, which may leave a sticky residue while beginning to peel off. (Shown as the picture) Do not attempt to modify the unit, modifying the unit may cause an accident.
FRONT PANEL PRECAUTIONS PRECAUTIONS ON FRONT PANEL 1. PANEL PLATE INSTALLATION 2.
. FRONT PANEL OPERATION 1. AUX IN Connect the audio cable to the unit then you can enjoy the music. 8. REL Press to remove the front panel. 2. IR WINDOW 3. Press to eject a disc. Press and hold this button to force ejecting a disc when the system becomes frozen accidentally. During opening the front panel, you can press the button to set the panel angle. /MUTE Press the button to turn on the unit and press and hold the button to turn off the unit.
☆ ☆☆TIPS FOR MODES SWITCH RADIO OPERATION ☆☆☆ Using the Touch screen In any mode, the controls on the touch screen change dynamically to suit the task at hand. 1/9. Touch once: to seek a station automatically downwards/upwards. 2.station preset button Touch once: to select the preset station. Touch and hold: to store the current station into the preset station position. 3.BAND To switch bands. 4. LOC To select strong or weak stations reception mode. 5.AMS Touch once: to browse preset stations.
MULTI-- PLAYER OPERATION RDS OPERATION In DVD mode, the touch screen displays as following after touch at random position top right/left area. 1. REG To turn on or off the REG function. 2.PTY To switch the RDS program types by ◀ / ▶ . 3.TA to turn on /off TA function 4.AF to turn on /off AF function 5.PTY to search program type 6/7. Seek-/Seek+ Touch to seek a station manually downwards/upwards. 8.RADIO To switch to radio operation page. 1.
SYSTEM SETUP In FIG.1, the user can adjust the value of BASS, TREBLE and SUB WOOFER by tapping on + / - on the touch screen. Touch on the top left position to enter source interface. The unit will return to previous mode display screen if any operation is not performed in 5 seconds. In AUDIO setting, the user can adjust the sound output effect leftwards or rightwards by tapping ▶ ◀ button; the sound output effect front wards or rearwards by tapping ▲▼ button. 3.
TIME SETTING Tapping on TIME button to turn to time adjust page. LOUD ON: To turn on the LOUNNESS function. OFF: To turn off the LOUDNESS function. RADIO REGION To select the right region as per the user locates. TOUCHSCREEN TIME MODE Set the time display mode(12H/24H). TIME DISPLAY ON: To display the time OFF: To turn off the time display mode. Tapping on TOUCHSCREEN button to turn to time TOUCHSCREEN adjust mode.
REMOTE CONTROL REMOTE CONTROL Installing the battery Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus (-) poles pointing in the proper direction. Use and care of the remote control Point the remote control in the direction of the front panel to operate to use it. Notes: Using batteries improperly can cause them to explode. Take note of the following points: * Keep the battery out of the reach of children.
REMOTE CONTROL OPERATION 1. 2. 3. 4. 5. 6. 7. PWR Press this button to turn on the unit, press and hold it again to turn off the unit. In unit on, press this button to turn on/off MUTE function. ST/AUDIO In radio mode, press to select stereo or mono reception; In DVD mode, press it to change the audio language. LOC/SUB-T In radio mode, press to select local stations or distant stations; Press to change the subtitle language in DVD playback mode.
15. SETUP In playback mode, press to display system setting picture, the user can select some relative constant parameters. In other mode, press this button to enter system setup page. 16. II> (Slow forward or slow reward) In playback mode, press the button to select slow forward or slow reward. 17. MENU Press the button to return to the root menu of the disc in DVD playback mode. 18. CLEAR Press the button to activate CLEAR function, it can clear the erroneous number what you import. 19.
3. performs the same operation. Volume Control Press VOL+ button on the remote control to increase the sound level and press VOL- button on the remote control to decrease the sound level. Press VOL+ and VOL- button on the head unit also performs the same operation. 4. Turning Loudness On/Off Briefly press LOUD button on the remote control to activate loud function. Press it again to shut down LOUD function. 5.
2.2 buttons (1-6) to store on. *If a new station will be stored in a preset memory which already has a station, the current station will be cleared and replaced by the new station. touch on < / > button on the touch screen. Manual Tuning There are three ways to tune in a station manually as below: press and hold << / >> button on the remote control; press and hold I<< / >>| button on the panel; touch on < / > button on the touch screen.
RDS (RADIO DATA SYSTEM) OPERATION 3. The RDS allows you to receive a variety of information such as traffic information, station names, and to retune automatically to a stronger transmitter that is broadcasting the same program.
NEWS CURRENT AFFAIR INFORMATION VARIED POP MUSIC FINANCE CHILDREN COUNTRY NATIONAL ROCK MUSIC OLDIES SPORTS EDUCATION M.O.R. MUSIC LIGHT CLASSIC SERIOUS CLASSIC OTHER MUSIC WEATHER SOCIAL AFFAIR RELIGION PHONE IN FOLK DOCUMENTARY TRAVEL TEST LEISURE JAZZ MUSIC ALARM DRAMA CULTURE SCIENCE An emergency broadcasting (ALARM) will broadcast automatically and produce the beep sound when it is received. The sound output through other source will be muted. standard wireless communication technology.
NOTE: *Press button on the remote control also performs dial(receiving) a call or hang up a call function *The incoming call will interrupt the sound output through other source, and switch to the hands-free phone screen automatically when it is received. After the call is ended, the unit will be back to the previous mode. * The hands-free phone sounds output through the built-in speakers.
Audio information of a bluetooth, compatible with mobile phone, portable player, etc., is transferred by wireless technology. Refer to CONNECT details to connect bluetooth audio devices. 3.1 3.2 3.3 3.4 4. AUTO-ANSWER ON: Tap on this button then the coming call will be answer automatically. OFF: Tap on this button then the coming call will not be answer automatically. CONNECT AUTO: Tap on this button then the unit and the device will be reconnected automatically.
the button, the options switch as follows order: Press the >>I or I<< button on the unit for long time will perform the same function. slow reward, as follows: 1/2→1/4→1/8→1/16→1/2→1/4→1/8→1/16→Normal Play Stop the playback Press ■ button to stop playing, then press ENTER button to play the current chapter or track, press stop button twice to stop playing completely, then press ENTER button to play the beg-inning of disc.
remote control. Changing the subtitle language (Multi-subtitle) With DVDs featuring multi-subtitle recordings, you can press SUB-T to switch between subtitle languages during playback. Selection options switch as follows: This function is operated by using the remote control. Notes: * This function only operates with DVDs featuring multi-subtitle recordings. Changing the audio language DVDs can provide audio playback with different language.
DVD mode, the setup menu will be displayed. It includes General Setting, Audio Setup, Video Setup, Preference Setup, Password Setup and Exit Setup menu. 1. Within the setup menu, you can use ▲▼ / buttons on the remote control to move the cursor, and then press the ENTER/PLAY button to make your selection. Press [ ] can return to the previous menu. 2. To exit setup menu, you can select the EXIT SETUP item in sub-menu or press SETUP button. 1.
effective on next time power on till exchanging the saved setting. 3.1 AUDIO AUDIO: Sets the preferred audio language as the default when playing DVD. (IF DVD supports these languages) 3.2 SUBTITLE SUBTITLE: Sets the preferred subtitle language as the default when playing DVD. (If DVD supports these languages) 3.3 DISC MENU DISC MENU: Sets the preferred menu language as the default when playing DVD. (If Users can switch the binaural mode among STEREO, L-MONO, R-MONO and MIX-MONO. 2.1.1 D.R.
DVD supports these languages) 3.4 3.5 PARENTAL PARENTAL: The parental control function works in conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches, There are up to 8 censorship classes for DVDs. DEFAULT DEFAULT: Resets to all the manufacturer's original settings for this DVD player Press ENTER to perform the reset. Note: The PARENTAL is changeable when4.1 PASSWORD MODE set to OFF.
4.2 password is 136900 PASSWORD CHANGE PASSWORD CHANGE: you can change the password, please type 6 numerals as new password. SETTING THE TV SCREEN SIZE Multi-aspect ratio suits to different TV screen size. Function supported by DVD discs. 5. EXIT SETUP MENU There are many functions available on DVD discs and the functions vary per player and per manufacturer.
MP3 OPERATION Playing a disc, an SD/MMC card or a USB device containing MP3 files Connect a USB device or press OPEN button to release the front panel, insert a disc into the disc slot or SD/MMC card into the card slot. The unit will automatically switch on when a disc, card or USB device is inserted. The screen will display as follow: During MP3 playback, press the >>I or I<< button on the remote control or on the panel or on the screen to select the next/previous track.
NAVIGATION OPERATION The GPS system can navigate with voice, when you do not drive on your preset line, the system will reset the line automatically to get the destination. Press OPEN button on the unit to open the TFT screen, the SD card slot is on this position (shown as illustration). It supports SD card with memorized navigation map only.
INSTALLATION Install the Unit Notes Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. Use only the parts included with unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
CABLE CONNECTION Note: 1. The reverse video line should be available while connected to +12 V. 2. The tel mute line should be available while connected to B-. 3. The parking break line should be available while connected to the car break. A wrong connection can be easily detected by our technical service for a repair request under the warranty.
SPECIFICATION GENERAL Power requirement -----------------------------------------------------------------------------------------12VDC (10.
TROUBLESHOOTING Common problems Symptom Power isn’t switched ON. The unit doesn’t operate Cause Remedy Leads and connectors are incorrectly Ensure that all connections are connected. correct A fuse of power cable has blown. Replace the old fuse with a new one with the same capacity; try to determine the cause of the problem. Outside factors are causing the unit to Reset the unit by pressing RESET operate incorrectly. with the tip of a pen. Operation with the remote Battery power is low. Load new batteries.
operated. There is no sound. Volume level is low. The player skips audio or This unit is not firmly installed. video. The disc is dirty or damaged. The picture is deformed. The aspect setting is incorrect for the display. Raise the volume level Check that the unit is installed firmly Clean the disc or change it. Select the appropriate aspect setting for your display. Problem during DVD playback Symptom Playback is not possible. Cause The DVD has a different region code from this unit.
The picture is extremely The disc features a signal to prohibit Since this unit is compatible with the unclear/distorted and dark copying (some discs may have this). copy guard analogy copy protect during playback. system, when playing a disc that has a signal prohibiting copying, the picture may suffer from horizontal stripes or other imperfections when viewed on some displays.
English Hereby, Macrom , declares that this M-DVD7702 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Macrom vakuuttaa täten että M-DVD7702 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
The BLUETOOTH ® world mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ALDINET S.p.A. is under license. The MACROM brand is a registered trade mark of MACROM SA and any use of such marks by ALDINET S.p.A. is under license.
