User Guide

Chapter 6202
To apply the Crop command to selected paths, do one of the following:
• Choose Modify > Combine > Crop.
• Choose Window > Toolbars > Xtra Operations and click the Crop icon.
Note: For more information on using and managing Xtras, see “Using and managing
Xtras” on page 79.
• Choose Xtras > Path Operations > Crop.
Using the Transparency command
Transparency creates a new path from the area common to two or more closed
paths containing Basic fills. This command uses the color information from the
fills of the original paths and creates an intermediate color giving the appearance
of transparency.
You can also create transparency effects using lens fills. For more information, see
“Applying lens fills” on page 293.
To apply the Transparency command to selected paths:
1 Do one of the following:
• Choose Modify > Combine > Transparency.
• Choose Window > Toolbars > Xtra Operations and click the Transparency icon.
Note: For more information on using and managing Xtras, see “Using and managing
Xtras” on page 79.
• Choose Xtras > Path Operations > Transparency.
2 In the Transparency dialog box, enter a value from 0 to 100 or change the value
with the slider control. Higher values make the back color more obvious; lower
numbers make the front color more obvious.
3 Click OK.