Specification Sheet

ManualsBrandsMacroreer ManualsComputers & AccessoriesMacroreer for Cisco SFP-10G-LR 10GBASE-LR SFP+ Transceiver Module Single-Mode 1310nm up to 10km SFP Ports

Shenzhen Macroreer E-Business CO., LTD.

3/F, Building 57, DaYun Software Park, 20140806

HenGang ST, LongGang District, Shenzhen, P.R.C Zipcode: 518000 Ver.:1.0

Tel: +86-755-85210544 Fax: +86-755-85210544

http://www.macroreer.com Email:marketing@macroreer.com

SFP-10G-LR

10.3Gbps SFP+ Transceiver, Single Mode, 10km Reach

Product Features

 Supports up to 10.7Gbps bit rates

 Hot-pluggable SFP+ footprint

 1310nm DFB laser and PIN photodiode, Up to 10km for SMF transmission

 Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle

 Compatible with RoHS

 Single +3.3V power supply

 Real Time Digital Diagnostic Monitoring

 Operating case temperature:

Standard: 0 to +70°C

Industrial: -40 to +85°C

Applications

 10Gbps Optical systems

 10GBASE-LR at 10.3125Gbps

 10GBASE-LW at 9.953Gbps

 LTE systems

 Other Optical links

Description

The SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps

and 10km transmission distance with SMF.

The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a

trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety

requirements.

The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics

functions.

Summary of content (9 pages)

PAGE 1
http://www.macroreer.com Email:marketing@macroreer.com SFP-10G-LR 10.3Gbps SFP+ Transceiver, Single Mode, 10km Reach Product Features  Supports up to 10.7Gbps bit rates  1310nm DFB laser and PIN photodiode, Up to 10km for SMF transmission       Hot-pluggable SFP+ footprint Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.
PAGE 2
http://www.macroreer.com TD+/TxFault TxDis LOS RD+/- Email:marketing@macroreer.com LD LD Driver Post Amp POWER PIN+TIA I2C Controller SCL SDA EEPROM Temp Vcc LD Bias Tx Power Rx Power ADC/DAC Transceiver functional diagram Absolute Maximum Ratings Parameter Symbol Min Max Unit Storage Temperature Ts -40 +85 °C Supply Voltage Vcc Operating Humidity - Recommended Operating Conditions Parameter Operating Case Temperature Power Supply Voltage -0.
PAGE 3
http://www.macroreer.com Email:marketing@macroreer.com Transmission Distance 10 Optical and Electrical Characteristics Parameter Symbol Centre Wavelength λc Side-Mode Suppression Ratio SMSR Extinction Ratio ER Average Output Power Data Input Swing Differential Input Differential Impedance Disable TX Disable Receiver Overload LOS De-Assert LOS Assert LOS Hysteresis Data Output Swing Differential LOS Unit 1270 1310 1350 nm -0.5 dBm 1 850 mV 2 Vcc V Transmitter 30 180 - 3.
PAGE 4
http://www.macroreer.com Email:marketing@macroreer.com Timing and Electrical Parameter Symbol Min Typical Max Unit Tx Disable Negate Time t_on 1 ms Tx Disable Assert Time t_off 10 µs Time To Initialize, including Reset of Tx Fault t_init 300 ms Tx Fault Assert Time t_fault 100 µs Tx Disable To Reset t_reset 10 µs LOS Assert Time t_loss_on 100 µs LOS De-assert Time t_loss_off 100 µs Serial ID Clock Rate f_serial_clock 400 KHz Vcc V 0.
PAGE 5
http://www.macroreer.com RX Power -20 to -1 Email:marketing@macroreer.com dBm ±3dB Internal Digital Diagnostic Memory Map The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
PAGE 6
http://www.macroreer.com Email:marketing@macroreer.com Pin Descriptions Pin Signal Name 2 1 Description Plug Seq. Notes TX FAULT Transmitter Fault Indication 3 Note 1 SDA SDA Serial Data Signal 3 Module Absent. Grounded within the module 3 VEET 3 TX DISABLE 5 SCL 4 6 MOD_ABS 8 LOS 10 VEER 7 9 11 RS0 Transmitter Ground Transmitter Disable SCL Serial Clock Signal RS1 VEER Shenzhen Macroreer E-Business CO., LTD.
PAGE 7
http://www.macroreer.com 12 RD- Inv. Received Data Out 3 VEER Receiver ground 1 13 RD+ 15 VCCR 17 VEET 14 16 18 19 20 Email:marketing@macroreer.com Received Data Out Receiver Power Supply 3 Transmitter Power Supply 2 TD+ Transmit Data In 3 TD- VEET Inv. Transmit Data In Transmitter Ground Note 4 2 VCCT Transmitter Ground Note 4 1 3 1 Note 5 Note 5 Notes: Plug Seq.: Pin engagement sequence during hot plugging.
PAGE 8
http://www.macroreer.com Email:marketing@macroreer.com Mechanical Dimensions Shenzhen Macroreer E-Business CO., LTD. 3/F, Building 57, DaYun Software Park, HenGang ST, LongGang District, Shenzhen, P.R.C Zipcode: 518000 Tel: +86-755-85210544 Fax: +86-755-85210544 20140806 Ver.:1.
PAGE 9
http://www.macroreer.com Email:marketing@macroreer.com Ordering information Part Number SFP-10G-LR SFP-10G-LRI Product Description 1310nm, 10Gbps, LC, 10km, 0°C~+70°C, with DDM 1310nm, 10Gbps, LC, 10km, -40°C~+85°C, with DDM Shenzhen Macroreer E-Business CO., LTD. 3/F, Building 57, DaYun Software Park, HenGang ST, LongGang District, Shenzhen, P.R.C Zipcode: 518000 Tel: +86-755-85210544 Fax: +86-755-85210544 20140806 Ver.:1.