Specifications

8
Power Up
The CM-6 steps through an internal self-test cycle for the first 1 minute that it is powered. The unit will execute
the test cycle any time power is dropped and reapplied (i.e. power failure). During the self-test cycle the unit will
display the Firmware Version number, then count down from 60 to 0 and finally go into normal operation. The
Fan and Alarm relay will be activated for the power-up cycle unless the “Power Up Test” (PUt) option is OFF.
The indicator light (LED) will flash green during the self-test cycle. At the end of the 1 minute cycle, the unit will
take its first sample of the air and the indicator light will turn solid green.