Installation Manual

3
3.3.6.4 Strobe Minimum On Time 25
3.3.7 Configure Zones Submenu 25
3.3.7.1 Zone Controls 25
3.3.7.2 Zone Group Type 26
3.3.7.3 Timed Day Selection 27
3.3.7.4 Start Time 27
3.3.7.5 Stop Time 27
3.3.7.6 Sensor Selection 27
3.3.7.7 Rising Trip Point 27
3.3.7.8 Falling Trip Point 28
3.3.7.9 Multiple Sensor Mode 28
3.3.7.10 Multiple Sensor Quorum 28
3.3.8 Configure Signals Submenu 29
3.3.8.1 Alarm Signal Summary 29
3.3.8.2 Alarm Buzzer Signal 29
3.3.8.3 Alarm Horn Signal 29
3.3.8.4 Alarm Strobe Signal 29
3.3.8.5 Warning Signal Summary 30
3.3.8.6 Warning Buzzer Signal 30
3.3.8.7 Warning Horn Signal 30
3.3.8.8 Warning Strobe Signal 30
3.3.8.9 Trouble Signal Summary 30
3.3.8.10 Trouble Buzzer Signal 31
3.3.8.11 Trouble Horn Signal 31
3.3.8.12 Trouble Strobe Signal 31
4 Troubleshooting 32
4.1 System Status Light Flashing 32
4.1.1 Input Channel Trouble 32
4.1.1.1 No Sensor 32
4.1.1.2 Wrong Sensor Type 32
4.1.1.3 Sensor Trouble 32
4.1.1.4 Faulty Wiring 32
4.1.1.5 Resettable Fuse 33
4.1.2
Internal Controller Board Trouble 33
4.2 Timed ventilation problem 33
4.3 No Power 33
4.4 LCD Display unreadable 33
4.5 The Keypad does not respond (LCD shows KEYS LOCKED) 33
4.6 The Keypad does not respond after silencing an Alarm, Warning or Trouble 33
4.7 After a power failure 33
4.8 Appendix A – Quick Set-up 34