Specifications

14
3.3.2 Configure System Submenu
The system configuration submenu provides entries to:
- Set the time of day, 24 hour format
- Set the day of the week, day 1 is Monday
- Load Default Configuration
- Change Password
3.3.2.1 Set Time of Day
Figure 3-16 Set Time of Day
This display example shows that the time is 22:55 (10:55 PM). The underlined characters indicate that the numeric keys can be used to set the current time of day. When the first digit is
entered(andafterthepasswordisenteredifrequired),thedisplaywillchangetoshowthatthe“hour”portionofthetimeiscurrentlybeingentered.
Figure 3-17 Enter Hours
In this example, the first digit entered was 1 (one), and the panel is waiting for the second digit of the hour to be entered. If the second digit is not entered within five seconds, the time will
reverttothepreviousvalue.Aftertheseconddigitofthehourisentered,thedisplaywillpromptforthe“minute”entry:
Figure 3-18 Enter Minutes
In this example, the hour (16) has been accepted and the panel is waiting for the minute to be entered. If no digits are entered within 5 seconds, the entry will be finished without changing
the minute, however the hour will be changed to the value entered.
Note that the time is saved as soon as the fourth digit is entered.
3.3.2.2 Set Day of Week
Figure 3-19 Set Day of the Week
This display example shows that Tuesday is the current day of the week. The underline character indicates that the day can be changed by entering the corresponding digit:
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
Note that the day of the week is saved as soon as the digit is entered.
3.3.2.3 Load Default Configuration
Figure 3-20 Load Default Configuration
When the number one (1) digit is pressed, the panel will prompt for the password, even if it has been entered previously. If the password is entered correctly, the panel will overwrite the
existing configuration with the default configuration. This operation is intended to restore the panel to a known basic condition if it is removed from one installation and installed in another.