Operation Instructions

Macurco
TM
DVP-1200 Manual
REV – 1.3.1 [34-8708-4770-7 ] 50 | Page
4.6.6 DATE/TIME – PASSWORD?
Menu path: Main Menu-->DATE/TIME – PASSWORD? -->
Figure 4-55 –
ENTER DATE/TIME – For the date and time, use the left/right keys to select the digit and the number keys to input a
value. For the day of the week, select the field and use the up/down keys to scroll through days of the week. Time is
entered in 12-hour format. To edit AM or PM, select the field and use up/down keys to toggle between AM and PM.
ENTER PASSWORD – This menu is used to enter a new password for the panel. Enter up to a 4-digit new password
and hit ENTER to save the new password.
4.6.7 EVENTS?
Menu path: Main Menu-->EVENTS? -->
Figure 4-56 –
The DVP-1200 keeps a log of events in its memory. To view the events, select EVENTS? and press ENTER. The display will load
the latest logged events if this menu is entered first time after power up otherwise it will load event screen last visited. It can
store up to 122,880 events and once this limit is reached it will start overwriting older events.
Power Up, Alarm, Warning, Trouble and Relay activation are types of events that are logged in the panel. All the logged events
will have date and time of the event occurrence. For Trouble, Alarm and Warning the event log will also have the sensor address
that caused the corresponding event. Alarm and Warning events for a sensor are logged only if they are assigned to a zone.
Figure 4-57 shows an example of Event Log screen and Table X lists the abbreviations used in Event Log for corresponding
events.