GAS DETECTION CM-1 COppm MANUFACTURED BY Aerionics, Inc. Sioux Falls, SD – Phone: 1-877-367-7891 – Email: info@aerionicsinc.com – www.macurco.
GAS DETECTION Detectors for use with Fire and Security Systems The Macurco CM-E1, GD-2B, GD-2A and HD-11 are low voltage detectors designed for use with Fire and Security Systems. The CM-E1 and GD-2A are UL 2075 Listed for use in residential and commercial applications and are also approved by the California State Fire Marshal.
GAS DETECTION Portable Single-Gas Monitors The Macurco Single-Gas Monitor Series is designed to continuously monitor the ambient environment and notify the user if the level of the target gas reaches the alarm set point for the monitor. The device is designed to operate for two years and then be disposed of according to local regulations. The Macurco Single-Gas Monitor is available in three versions CM-1, HS-1 and OX-1 to monitor either Carbon Monoxide (CO), Hydrogen Sulfide (H2S) or Oxygen (O2).
GAS DETECTION Macurco 6-Series Detectors The Macurco 6-Series are low voltage, dual relay gas detector, controller and transducers. The 6-Series have selectable 4-20mA output, buzzer and digital display options.
GAS DETECTION Macurco 12-Series Detectors The Macurco 12-Series are line voltage powered (100-240VAC), dual relay gas detector, controller and transducers. The 12-Series utilizes an internal switching power supply that is capable of using line voltage between 100 and 240VAC and 50-60Hz. The 12-Series have selectable 4-20mA output, buzzer and digital display options.
GAS DETECTION DVP-120 Detection and Ventilation Panel The DVP-120 exhaust fan controller, in conjunction with Macurco gas transducers, provides automatic controls to help maintain an acceptable environment in parking garages or other facilities. The DVP-120 system is designed to meet specifications for safety in enclosed parking garages, including the Uniform Building Code and OSHA 50ppm CO requirements. The DVP-120 can control up to twelve gas sensors in any combination.
GAS DETECTION DVP-120M Addressable Detection and Ventilation Panel The DVP-120M is a Modbus-Enabled Detection and Ventilation Panel with up to 87 Modbus addressable sensors on three channels of 29 sensors per channel, plus the original 12 analog 4-20mA sensor channels. The DVP-120M increases the capacity of the DVP-120 from 12 detectors to 99. System wiring includes 4-20mA current loop and RS-485 serial interface. • • • • • Same features as the DVP-120 Coverage Area: Up to 495,000 sq. ft.
GAS DETECTION Hazardous Locations Gas Detection Equipment used in areas where explosive concentrations of vapors may exist must be equipped with special enclosures, wiring and other electrical apparatus for safety purposes.
GAS DETECTION Macurco Parts and Accessories Macurco offers calibration and test kits, calibration gas, service, parts and accessories for the Macurco Security Series, 6-Series, 12-Series, Portable Single-Gas Series and IT Series products. For a full list of accessories, specifications and instructions please visit our website at www.macurco.com. DMK-1 Duct Mount Kit The Macurco DMK-1 is an air tight enclosure that provides a means to mount any Macurco 6-Series or 12-Series gas detectors to an air duct.
Fixed Gas Detection Item ID Model Description QTY UOM 70-0715-1778-6 CM-E1 Carbon Monoxide CO Detector for use with fire alarm/burglary control panels 1 EA 70-0715-6468-9 GD-2A Combustible Gas Detector for use with fire alarm/burglary control panels 1 EA 70-2900-0005-3 GD-2B Combustible Gas Detector for use with fire alarm/burglary control panels 1 EA 70-0714-0334-2 HD-11 Hydrogen H2 Detector for use with fire alarm/burglary control panels 1 EA 70-0715-4473-1 CM-E1/10 pack Carbon Monoxi
Accessories Ammonia 70-0714-8437-5 AM1-FCK Ammonia NH3 Calibration Kit, 34L 25 ppm, 0.2 LPM Regulator 1 EA 26-2900-0005-4 AM Sensor TX-6-AM Replacement Ammonia NH3 Sensor 1 EA Hydrogen Sulfide 70-2900-0011-0 HS1-FCK Hydrogen Sulfide H2S Calibration Kit, 34L 25 ppm, 0.
CM-1 COppm Celebrating over forty years of gas detection, the Macurco product line offers equipment for residential, commercial and industrial applications. Since 1972 Macurco has been providing detection options for a number of different gases including carbon monoxide (CO), nitrogen dioxide (NO2), hydrogen (H2), propane (LP) and methane (natural gas). Headquartered in Sioux Falls, South Dakota, Aerionics manufactures Macurco Gas Detection products.
