Manual

[12]

.com

TRITTONUSA

.com

TRITTONUSA

dIgItal audIo setuP

Charge the battery and insert it into the Headset. See page 7 for more information.

Remove protective caps from the Optical Cable.

A- Plug one end of the Optical Cable into the optical port on the rear of the Xbox 360

Console. Plug the other end of the Optical Cable into the wireless Base Station.

B- If using the Xbox 360 Console (Original) with HDMI, connect the Optical Cable to the

Digital Audio Adapter, and then connect the Digital Audio Adapter to the AV port on the

rear of the Xbox 360.

If using the Xbox 360 Console (Original) with Component/VGA/Composite AV cable,

connect the Optical Cable to the optical port on the Component/VGA/Composite AV cable.

Connect Power Adapter to Base Station. Plug Power Adapter into wall outlet.

Power ON the Xbox 360 Console and Headset.

In the Xbox dashboard, select System Settings > Console Settings > Audio > Digital Output

and select “Dolby Digital 5.1.” Watch to ensure that the “Dolby Digital” light on the Base

Station illuminates as a game or movie starts.

To conﬁrm Xbox LIVE settings, press the “Xbox Guide Button” when a game is loaded, and go

to Personal Settings > Voice. Ensure that “Headset Only” is selected.

Press the connect button on the Xbox 360. Press and hold the connect button on the headset

for 3 seconds.

Match the Base Station quadrant to the controller by pressing the Connect Button. See page

18 for more information.

Press the Input button on the Headset to select the digital input. The “Digital” LED on the

Base Station will illuminate when the digital input is selected.