Installation and maintenance notebook DETECT LINE NG Attention: document to be filled during each installation. If the system is installed by you, thank you to return imperatively the double page of the middle (P9-10-11-12). Otherwise, the guarantee can not be taken into account. In order to ensure the proper functioning of the system, preventive maintenance must be carried out every 24 months. Thank you to contact the company MADE for the establishment of a maintenance contract.
General information Company Name: ……………………………………………………………………………………………………………………..………….. Date of installation: ……………………………………………………………………………………………………………………………… Name of the installer: ………………………………………………………………………………………………………………………….. Installation Installation support: ……………………………………………………………………………………………………………………………… Vehicle registration: ……………………………………………………………………………………………………………………………… Vehicle characteristics: ……………………………………………………………………………………………………………………….… Materials Central Unit case serial number : …………….
Presentation DETECT LINE NG: High Voltage line volumeric detector: HVA (< 50 kV) and HVB (> 50 kV). DETECT LINE NG warns the user by an audible alarm when the lifting machine enters a risk zone. Central unit Sensor management and control sensors, generation of audible and visual alarms, movement blocking management (optional). Lamp « power on » System in working order Electric field present - Lamp "Audible alarm" off - Lamp "Audible alarm" flashing*.
Connections Full system connection: Outside display unit present: Yes No 12V 24V Power supply of the central unit: Power: Indicate the place: ………………………………………………………………………………………………………………………….…. Power supply after + PTO Yes No Activation of alarms at power up Yes No Cut movement Yes No Indicate the place: …………………………………………………………………………………………………………………………….. Observations: ……………………………………………………………………………………………………………… FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Sensor wiring: Use the M8 3-pin male connector for sensor wiring 4 3 1 3 1 blue white 4 ground braid Warning: the earth cable must be as small as possible.
Display unit wiring: Connector 1 2 3 4 brown pink white yellow 24v Info danger vigilance 5 6 7 8 green grey blue red buzzer OI BP2 BP Report masse NC.
To activate the alarm monitoring mode, the control input must therefore be activated at ground potential (GND) or V + (12-24V).
FCC statement §15.21 The user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC statement §15.105 a) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DETECT LINE NG Installation and maintenance NoteBook Attention: Page (9-10-11-12) to be filled during each installation, and returned to us Return the double page at the address: MADE S.A. 167, Impasse de la garrigue F 83210 LA FARLEDE Phone : +33 (0) 494 083 198 Or by mail: interventions@made-sa.com Otherwise, the guarantee cannot be taken into account. FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Fill in idem page 2 General information Company Name: ………………………………………..……………………………………………………………………………………..………….. Date of installation: ……………………………………………………………………………………………………………………………………….. Name of the installer: ……………………………….…………………………………………………………………………………………………… Installation Installation support: ……………………………………………………………………………………………………………………………………….. Vehicle registration: ………………………………………………………………………………………………………………………………………… Vehicle characteristics: ……………………………………………………………….
Fill in idem page 4 Specify: Outside display unit present: Yes No 12V 24V Power supply of the central unit: POWER: Indicate the place: ………………………………………………………………………………………………………………………….…. Power supply after + PTO Yes No Activation of alarms at power up Yes No Other (specify) Indicate the place: …………………………………………………………………………………………………………………………….. Cut movement Yes No Indicate the place: ……………………………………………………………………………………………………………………………..
Fill in idem page 13 Tests Sensor test Testeur TC HT Use Testeur TC HT. Otherwise, approach a 230V cable on the sensor. Display unit Test General control of functions: (bring an AC voltage source to the sensor) Audible alarms Yes No Visual alarms Yes No In service Yes No MADE-SA: Wiring done by Name : Signature : Customer: Supply of the simplified form or the user guide Basic training with system explanation Name : Signature : Observations: ………………………………………………………………………………………………………………………………………….
Tests Sensor test Testeur TC HT Use Testeur TC HT. Otherwise, approach a 230V cable on the sensor. Display unit Test General control of functions: (bring an AC voltage source to the sensor) Audible alarms Yes No Visual alarms Yes No In service Yes No MADE-SA: Wiring done by Name : Signature : Customer: Supply of the simplified form or the user guide Basic training with system explanation Name : Signature : Observations: …………………………………………………………………………………………………………………………………………..
Technical visits Date FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Work FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Technical visits Date FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Work FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Reminder on High Voltage lines Reminder on the Electrical lines AN OPERATIONAL AID Detection of powered overhead lines from 20000Volts. Warning : The system is inoperative on: - Low Voltage overhead power lines (380V) - Medium voltage direct current power lines (trams, railways in general, ..) The VIGILANCE and ATTENTION of the operator must remain maximum when approaching live power lines. FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Reminder on High Voltage lines Electrocution can happen even without touching the line! FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.
Reminder on High Voltage lines The different lines! Safety distances Up to 50000 volts: 3 m FI_CE_NG_DETECT_LINE_USB_FCC_V1_00US.