(MG-SH-132) ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect the product, assemble this item on a soft surface such as a cardboard or a carpet. While assembling the product, first tighten the screws up to 50%. Once all parts are in place, only then fully tighten the screws! CARE INSTRUCTIONS Wipe only with a soft & dry cloth. To protect product, avoid the use of chemicals and household cleaners.
STEP ASSEMBLY INSTRUCTIONS Attach the Support Frames together (A to B and C to D). Note While assembling the product, first tighten the screws up to 50%. Once all parts are in place, only then fully tighten the screws! To hold them in place, insert Bolts (M) in the given holes. Tighten using the L-Key (P).
STEP 2 E For further assembly, take a Shelf (E) and place it on the Support Frame. Once aligned, place the Flat Washer (J), Lock Washer (K) and bolt (L) as shown in the image.
Tighten using the L-Key (P). Repeat with the other Shelves (F.G,H and I).
Drill holes in place of the marks. Using a hammer, insert Wall Plugs (O) in the holes you just marked N SCREW DRIVER Now, insert Screws (N) and tighten completely with the help of a Screwdriver.