MH-TB-813 Ok, let’s get started! This is easy. You don’t have to be a DIY expert to assemble this product. Just follow our instructions and you will have a show-off worthy addition in no time.
what to do Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface for assembly. While assembling the product, tighten the bolts up to 50%. Once all parts in place, only then fully tighten the bolts. how to care Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately.
product parts what’s included (D)-Flat Washer (Ø20mmxØ8mm) 10x A Table Base (E)-Lock Washer (Ø15mmxØ8mm) 10x (F)-Screw (M6X20mm) 10x (B - Left) Left Metal Leg (B - Right) Right Metal Leg C Metal Rod - 2x (G)-Screw (M6X10mm) 8x (H)-Allen Key (Ø4mmx8mm) 1x 3
assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, But nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! step 1: Turn the Table Base (A) upside down and insert the Metal Rod (C) as shown in this image. Note - While assembling the product, first tighten the screws up to 50%.
step 2: Insert the Right Metal Leg (B-Right) into the Metal Rod (C) shown in this image. step 3 Repeat the same with the Left Metal Leg (B-Left) using the image as reference.
step 4: Next, see the areas highlighted in this image to know where to tighten the Screws (F) and Washers (D&E). step 5: To fix all the parts in place, fasten Screws (F) and Washers (D&E). Place Lockwasher (E) on top of Flat washer (D) and Screw (F) on top of it as shown in this image.
step 6: To complete assembly, fasten the final set of Screws (G) using an Allen Key (H) as shown in the highlighted areas.
to err is human Drop-tested packing, double-checks, experienced craftspeople, high-end materialswe keep everything in mind to ensure your furniture arrives at your doorstep without any problems. But mistakes can sometimes happen because, well, to err is human. So, in the event of missing parts, delivery problems, damaged parts, please reach out to our team.