PASS MEDIA CABINET (MG-TB-817) ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect finish, assemble this item on a soft surface such as a cardboard or a carpet. Until all parts are in place, do not fully tighten all the bolts. CARE INSTRUCTIONS Wipe only with a soft & dry cloth. To protect finish, avoid the use of chemicals and household cleaners. Any liquid spilled on the furniture should be cleaned up immediately with a damp cloth.
STEP STEP Turn the Cabinet Top (A) upside down. See the highlighted areas in red to know where to Now set the Metal Legs (B) on top of the Cabinet Top (A) as tighten the Screws (E) and Washers shown in the images below. To begin to tighten the Screws (E) and Washers place them on top of each other (D on top top of D) as shown in the image below.
STEP Using the L-Key (F) tighten all Screws (E) and Washers (C&D) to set the Metal Legs (B) to the Cabinet Base (A).