VANCOUVER CONSOLE TABLE (MG-TB-838) ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect finish, assemble this item on a soft surface such as a cardboard or a carpet. Until all parts are in place, do not fully tighten all the bolts. CARE INSTRUCTIONS Wipe only with a soft & dry cloth. To protect finish, avoid the use of chemicals and household cleaners. Any liquid spilled on the furniture should be cleaned up immediately with a damp cloth.
STEP To begin fixing the Table Legs (B) to the Table Top (A), insert the Metal Legs (B) into the spaces given in the Table Top (A) as shown below.
STEP 2 Now, to join all Table Legs (B) to the Table Top (A) fasten Flat Washers (C) and Bolts (D). Place them on top of each other. Bolts (D) on top of Flat Washers (C) as shown below. See the red highlighted areas to know where to fasten the Washers and Screws.
STEP 3 Using the Wrench (E), now fasten Flat Washers (C) and Bolts (D) on the highlighted areas to secure all four legs.