User's Manual

Fig. 3. The Start page.

2.3.2. Step 1: Configure TCP/IP Settings

Fig. 4. TCP/IP settings.

Go to the TCP/IP, Addressing section to configure IP address settings. The IP address can be manu-

ally set or automatically assigned by a DHCP server on the LAN. If you are manually setting the IP

Address, Subnet Mask, and Default Gateway settings, set them appropriately, so that they comply with

your LAN environment. In addition, you can specify the Host Name and Domain (DNS suffix) of the

AP. When you are finished, click Save at the bottom of this page, and then you are brought back to

the start page.