Use and Care Manual

© 2019/02210
Ladder Horse is a
universal tool.
Similar to a machinist v-block, use the Ladder
Horse for supporting, cutting, trimming and
sawing. It works anywhere your ladder works.
Unlike a sawhorse, the Ladder Horse requires no
unfolding, no assembly, and no bulky storage.
Save your back! No more bending over. Place
the Ladder Horse on the support across the back
of your ladder to stand up and cut.
Cut EMT, Rigid, PVC and even threaded rod.
Marked measurements on the Ladder Horse help
you cut the proper length for your needs.
Increase your safety by letting Ladder Horse do
the work. It can support fixtures while you get
your footing. While standing up, cut drywall, and
similar materials upright, using a t-square for a
nice straight edge.
• Solid aluminum construction
• Marked measurements
• Works with most stepladders
Madison Electric Products, Inc. 30575 Bainbridge Road #130 • Solon, OH 44139 • P: 1-800-631-7775
Description
MLH
1.13 lbs. 6.80 lbs.
LADDER HORSE
6
1
Item#
Master
Weight
Master
Carton
Inner
Weight
Inner
Carton
CUT EMTCUT THREADED ROD
SUPPORT FIXTURES CUT DRYWALL