Installation & Assembly

Pre-assembly:

Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.

Important safety instructions:

Please carefully read all instructions before assembling the table.

For your safety and ease, assembly by two or more adults is recommended.

Keep instructions for future use.

PAGE 1
Important safety instructions: Please carefully read all instructions before assembling the table. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware. Remove all parts and hardware from box along with any plastic protective packaging.
PAGE 2
Step 2. Attach each foot (D) to the bottom of post (B) through stretcher (C) as shown below. Securely tighten the feet (D). B Step 3. 1) Turn the assembled table to an upright position. 2) Place the clear plastic pad (a) on the top frame (A) as shown below. 3) Gently lay the glass (E) on the table top. Assembly is complete. (a)x8 Caution: Failure to follow these instructions may cause the bolts to misalign during assembly. ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.