Use and Care Manual

Installation Instructions
Step 1 – Checklist
You will need the following tools:
- Drill
- Pencil
- Step Ladder
- Measuring Tape
- Screwdriver
Mounting inside the Window Frame (Ceiling)
Step 2 – Mounting Brackets
The Roman Shade (a) can be mounted two ways; either Inside (Ceiling
Mount) or Outside (Wall Mount) of your window frame using the provided
Brackets (b). You will need to leave 3-5 inches of space from the ends of
the Headrail (e) to properly mount the Brackets. ONLY use the Wall
Anchors (d) if you are mounting the brackets onto dry wall.
Mounting Outside the Window Frame (Wall)
Fix the Brackets (b) on the wall outside and above the window frame.
Ensure that the Brackets are moved in 3-5 inches from the sides of the
window frame. Then place the Bracket Screws (c) through holes on the
back plate of the Bracket and tighten until securely fastened to the wall.
3"~5" 3"~5"
Wall
Fix the Brackets (b) onto the ceiling (top)
inside the window frame, leaving a depth
of 3 inches or more from the window.
Ensure that the Brackets are moved in
3-5 inches from the sides of the window
frame. Then place the Bracket Screws (c)
through the top holes and tighten
until securely fastened to the top of
the window frame.
Step 3 – Fitting the Shade & Securing the Headrail
Place the Headrail (e) onto the
Brackets (b) by inserting the
back side of the Headrail (d) on first
and then pushing the front side
upward until it snaps into place.
There should be an audible click,
when the Headrail is secured.
Once secured, reattach the Roman Shade (a) to the hook and loop
fastener on the front of the Headrail (e).
Step 5 – Maintaining Your Shade
Dust your shades with a soft clean cloth or a feather duster. Lower the
shade to its fullest length for a complete cleaning. You can also detach
the shade from the bar, with the hook and loop fastener and lightly
shake for a simple cleaning.
*Top fabric face is detachable, but not fully removable.
Step 4 – Operation of Your shade
To lower the shade:
Pull the handle, on the back, to lower down the shade until the desired
height. Pull the handle again to hold the shade in place.
To raise the shade:
Pull the handle, on the back, twice to release the shade. Lift to the
desired height then pull the handle again to hold the shade in place.
Ceiling
Headrail (e)
(a)
(b)
For easier fitting, detach the
Roman Shade (a) from the hook
and loop fastener on the front
of the Headrail (e).
*Top fabric face is detachable,
but not fully removable.
Content
27in. x 64in.
31in. x 64in.
33in. x 64in.
35in. x 64in.
Shade
Size
Shade
(a)
Bracket
(b)
Bracket
Screw
(c)
Wall
Anchor
(d)
1
1
1
1
2
2
2
2
4
4
4
4
4
4
4
4
39in. x 64in.
1 2 4 4