Specifications

ManualsBrandsMadrigal Audio Laboratories ManualsCD-playersProceed

Remote Control, CDD

1 IR TRANSMITTER WINDOW

The CDD’s Remote Control sends infrared (IR) commands through its pro-

jection lens, and the CDD receives IR commands through its Remote sensor

window. (See “Front Panel, CDD”). If either of these lenses is obstructed,

no IR commands can be received by the CDD. If you notice IR perfor-

mance deteriorating, you may want to clean these lenses with a soft cloth

and some glass cleaner. (Spray the cleaner on the cloth first, and then wipe

the lens with the moistened cloth. Do not spray the cleaner directly on ei-

ther lens, as this may allow moisture to migrate into the electronics behind

the lens assemblies.)

2 TRANSPORT BUTTONS

The buttons used for routine operation of transport functions on the CDD

are grouped at the top of the remote control. They include:

( /dwr) stop/dwr: Press to stop play. The same button will operate

the drawer if stopping the disc has no relevance (e.g., if it is al-

ready stopped, or if there is no disc inside the CDD).

( / ) previous/rewind: When pressed and released quickly, this

will take you to the beginning of the current track; when pressed

repeatedly, this button will step you backwards through the previ-

ous tracks, one at a time. ( is the international symbol for previ-

ous). When pressed and held, the CDD will enter a reverse au-

dible scanning mode similar to the familiar rewind function of

many cassette decks, allowing a precise location within a track to

be located.

( / ) play/pause: Press to enter the play mode from either stop,

pause or standby, or to restart play at the beginnning of the

track currently playing. When in play mode, press to pause play

in the current location. If left in pause mode for more than two

minutes, the CDD will enter extended pause mode, shutting

down both the laser and the drive motors to enhance longevity

and reliability. Upon pressing pause or play a second time, the

disc will spin up and begin playing from the location where it

had been paused.

( / ) next/fast forward: When pressed and released quickly, this

will take you to the beginning of the next track. ( is the interna-

tional symbol for next). When pressed and held, the CDD will

enter a fast forward audible scanning mode similar to the familiar

fast forward function of many cassette decks, allowing a precise

location within a track to be located.

PR O C E E D

■/dwr / / /

123

4 5 6 prog+

7 8 9 prog–

0 time index

disp off repeat rpt a/b rndm

select up display

mute down standby