Owner`s manual

2 aes/ebu LED

The aes/ebu LED lights when the Nº360 detects that the digital

program being processed conforms to the AES/EBU (Audio Engi-

neering Society/European Broadcast Union) professional standard.

This LED indicates the presence or absence of certain encoded in-

formation in the digital signal. It does not indicate that the AES/

EBU connections (a connection standard written by the same

group) are being used. Playback of non-AES/EBU CDs or DATs

won’t activate the

aes/ebu LED, even if the associated transport is

connected according to the AES/EBU standard.

3 Display

See “Display, Nº360” beginning on page 17.

4 mode button

The mode button serves two functions, one in day-to-day opera-

tion and the other only during setup:

• In everyday use, the mode button allows you to see the status of

the digital output and to turn it on or off.

• During setup, the mode button allows you to rename the vari-

ous inputs of the Nº360 to suit the needs of your system, mak-

ing it easier to use (especially for those who use the system in-

frequently). It also allows you to toggle the HDCD volume ad-

justment between Automatic and Manual.

To check on whether your selected input is present at the digital

output, press mode once. This action causes the display to indicate

whether the digital record output is on or off. For example, the

display shown below indicates that the digital record output is on.

To disable the digital record output, press the mode button again

(while RCD: ON remains displayed). The display will read RCD:

OFF

and the digital output of the Nº360 will be temporarily dis-

abled. This eliminates any potential interaction between the

record output circuitry of the Nº360 and the rest of your system.

Repeatedly pressing the mode button while RCD: shows in the left

half of the display will toggle the Nº360 between RCD: OFF and

RCD: ON for the selected source.