Owner`s manual

Unpacking and Placement

Send in Your Warranty

Card!

So far, you have only half a product. The other half is the ongoing ser-

vice and support we can provide you to complement your new compo-

nent and help you maximize your enjoyment of it. Unfortunately, we

cannot give you this other half of the product you just purchased un-

less you tell us where to find you.

Sending in your warranty card will automatically add your name to our

mailing list, and will allow us to contact you for the occasional special

offer. We do not share this list with anyone; all names are held in strict

confidence. We simply want the opportunity to provide superior ser-

vice, as our way of thanking you for buying one of our products.

Unpacking the Nº360 Unpack your Nº360 Digital Audio Processor and remove all accessories

from the carton. Keep all packing materials for future transport.

Included with your new Mark Levinson processor is a pair of knit,

white gloves designed to assist you in the initial unpacking and place-

ment of your new purchase. Please accept them as a token of our ap-

preciation for having purchased one of our products.

Placement of the Nº360 The Nº360 should be placed close to your digital source equipment,

keeping interconnect cabling short. We recommend shelf mounting to

allow for proper ventilation. The Nº360 is designed for continuous op-

eration, which is why it features a standby mode rather than a full “off”

mode—it is designed to be connected to the AC mains at all times for

the best performance.

Please allow 3 to 4 inches of clearance above the Nº360 to allow heat

dissipation through air circulation.

Drawings are included in this manual to facilitate special installations

and custom cabinetry (see “Dimensions”).