Owner`s manual

1-10
Getting Started Mark Levinson
Quick Start Guide (continued)
4. Reconnect the Nº 320S and all associated components to
electrical outlets. Then, power on the Nº 320S and all associated
components. It is recommended to power all power amplifiers
on last.
5. Rotate the Nº 320S front panel select knob or press the remote
control select ± buttons to select the Nº 320S input that
corresponds to the Nº 320S stereo input connectors selected
in step 2.
• The Nº 320S front panel display indicates the name and
volume level of the selected input.
• Factory-default input names correspond to their assigned
stereo input connectors. For instance, Input 1 is assigned
to the stereo input connectors labeled 1, Input 2 is assigned
to the stereo input connectors labeled 2, and so on.