User manual

2 Standby Button

As you might expect, pressing this button toggles the Nº383 be-

tween standby mode and normal operation. The Nº383 disables

its outputs and controls when in standby, but its circuitry remains

active so as to be warmed up and sounding its best at a moment’s

notice.

3 Setup Button

Duplicates the function of the setup button on the front panel,

allowing you to access menu functions of the Nº383 from your lis-

tening position.

4 Enter Button

Duplicates the function of the enter button on the front panel,

allowing you to save changes to menu items in the Nº383 from

your listening position.

5 Select Up and Down Buttons

These buttons provide remote selection of the various inputs of

the Nº383.

The select buttons are also used when accessing the setup menu

system in the Nº383. For more information on what you can do

with these menus, please see “Customizing Your Nº383” later in the

manual.

6 Volume Up and Down Buttons

Raises the volume at either low speed for fine adjustments or

higher speeds for larger changes. The Nº383 will slowly raise its

output for the first 1.5 seconds this button is depressed, then

move to higher rates of change.

Note that all volume and balance functions are disabled if a sur-

round sound processor “SSP” input is selected. For more informa-

tion on this special feature of the Nº383’s design, see “Using Sur-

round Sound Processors.”

7 Display Button

Duplicates the function of the display intensity button on the

front panel, cycling among four levels of brightness (including

“off”) for the display, allowing adjustment for various ambient

lighting conditions.