User manual

MADRIX Help and Manual129

"Available Memory" shows how much free system memory (physical RAM) is available. If the

value falles below 100 or stands near 0, performance problems are likely to occur.

Part 3 lists all connected interfaces that are enabled.

The column "Type" says whether the connected device is of the type DMX or DVI. "Device"

shows the description and information about the device.

"Frequency" displays the frequency (Frame rate, Frames/s) of the device with which it currently

sends or receives. When using DMX-OUT this figure should reach the value that is configured in

the "Device Manager" under the tab "DMX devices" ("Frames/s"). »DMX512 (DMX-OUT)

"State" tells if a device sends data ("sending") or receives data ("receiving"). The entry "???"

says that the status is currently unknown. Examples for this situation are: 1) DMX-IN is enabled

but no data is being sent. 2) While sending data via an interface, the interface is being

disconnected from the PC.