User manual

Using The Software 144

In general, you should first select all Storages you want to copy. Navigate to the other list and

choose the Storage Places where your selected Storages should be saved. Then, use one of the

buttons described below.

Please use the "Ctrl" or "Shift" keys for multiple selection. Especially, in the case of copying images

and videos it may take a while to copy all Storage Places. The two progress bars at the bottom of

the window will show you the progress.

Please select the Storages you want to copy and then click on the right arrow to copy

them from A to B. In this process, the Storages will be assigned their previous numbering. In other

words, Storages 1 to 8 of Storage A will be copied to 1 to 8 in Storage B.

Please select the Storages you want to copy and then click on the right arrow to copy

them from B to A. In this process, the Storages will be assigned their previous numbering. In other

words, Storages 10 to 15 of Storage B will be copied to 10 to 15 in Storage A.

With an activated Map button you can copy selected Storages defining their exact

spot in the lists. Hence, you can copy one Storage Place to a different Storage Place in the other

Storage. In this way, you can change the numbering. For example, you want to copy Storage

Place A1 to Storage Place B50. Using only the arrow keys, as described above, this is not possible.

Using the "Map" function makes it possible. When activated, the button will glow green.

Use this button to copy one single Storage Place from Storage A to several Storage

Places in Storage B. Simply select the effect in the list of Storage A and select multiple Storage

Places in the right list. Then press this button.