User manual

Using The Software 162

The Color FaderBox

The Color FaderBox is a helpful addition to the Color Picker.

Use this button to call up the FaderBox. The dialog that will be shown contains four

sliders to assign a color value to each of the channels (red, green, blue, and white, if applicable).

The white channel only applies if RGBW fixtures are used. If only 1-channel fixtures are used, the

all channels except the first channel will be disabled.

You could also enter a value between 0 and 255 in the field displayed below each slider. Use the

spacebar once to set a value instantly to 0 or 255. Perform a left-click into a value field and

continue to hold the mouse button. Then, move your mouse up or down to adjust the value.

The result of your choices will be shown in the large field at the bottom of the window. This is the

color you have chosen. Press "Close" to exit the dialog.