User manual

MADRIX Help and Manual163

The Color Table

The Color Table contains a list with different colors; each used in the effect. You can enter

numerical values from 0 to 255 for red, green, blue, white, and the alpha channel via input fields

at the top. The alpha channel sets the opacity of a single color. Then, it becomes transparent and

blends with the background.

The white channel only applies if RGBW fixtures are used. If only 1-channel fixtures are used, the

all channels except the first channel will be disabled.

You can extend your list with a new color value by pressing the "+" button. Existing entries can

be deleted from the list by marking it and pressing the "-" button. The order of your entries

(colors) may be changed, too. In order to do so, simply select the color and press the upward

arrow or the downward arrow.

If you select an entry, you can choose your color with the help of entering values directly or by

using the Color Picker, which is implemented here as well (see above).

The list you created as well as presets can be saved and loaded. The number of entries in the list

can be seen in the lower part of the window. In our example shown above, six entries are

currently included in the list (#6). To close the window, click "Close".

Drag the upper or lower border of the color table window to resize the whole dialog.