User manual

Using The Software 168

Map

The section "Map (Position/Size)" includes

parameters to define the position and size of the selected layer/effect. "Pos X" sets the position

in x. "Pos Y" defines the position in y. "Size X" and "Size Y" are to set the size in x and y,

respectively. In this way, you are allowed to display the effect in a larger or smaller size than the

virtual matrix size.

Several presets, such as "Full Size", "Double Size", "Half Size", "Top", "Bottom", "Left" ,"Right", etc.

are already included and available via the quick select button below.

"Mirror" is an option to mirror effects horizontally ("Mirror H"), vertically ("Mirror V"), and in a

horizontal-vertical direction ("Mirror HV") or not ("No Mirror").

Negative values may be used, too. In this way, you can map an effect to an outer area. Equally

helpful is the option to "grab" and move the colored map square directly with your mouse or to use

the faders.

If you have mapped several layers, a colored square will be displayed for each layer in addition to

the currently mapped layer.