User manual

Using The Software 170

Tile

The "Tile" section allows you to apply tiling to

the selected layer/effect. In other words, you are able to divide the virtual matrix into sections.

"Scale" influences the size. A factor of 4 means that you will get 1/4 of the original size and the

mode is automatically set to "Repeat Mode". "Pos X" defines the position in x, whereas "Pos Y"

defines the position in y. "Size X" and "Size Y" were implemented to be able to modify the size of

the layer/effect. Hence, you can render an effect larger or smaller than the virtual matrix size.

"Offset X" and "Offset Y" define the spacing between repeated or mirrored sections.

Several presets, such as "Full Size", "Double Size", "Half Size", "Top", "Bottom", "Left" ,"Right", etc.

are already included and available via the quick select button below.

"Mirror" is an option to tile effects horizontally ("Mirror H"), vertically ("Mirror V"), and in a

horizontal-vertical direction ("Mirror HV") or not ("No Tile"). You can also choose to repeat the

effect ("Repeat").