User manual

Using The Software 174

Example 1: How To Use The Backup System And Art-Net

We recommend to always use two separate networks with two network cards if you want to sync

Master & Slave and use Art-Net at the same time.

Minimum requirements for this set-up are two computers, two Ethernet switches, one Art-Net

device, Ethernet cables, and DMX cables.

Apart from that, both computers need to have two network cards installed. The set-up for the

first network card is 192.168.0.x and the second is 2.0.0.x. The former will be used as the backup

system, the latter is transferring Art-Net data.