User manual

Using The Software 180

Select "Load Patch" and the pre-defined virtual matrix and Patch settings will be loaded from this

Setup. This overwrites your current Patch. If you deselect this option, your current Patch will be

used.

Select "Load DMX Device Settings" and all settings regarding DMX devices will be loaded from

this Setup. This can overwrite your current settings. Deselect this option if you have configured

your own DMX settings.

Select "Load DVI Device Settings" and all settings regarding DVI devices will be loaded from this

Setup. This can overwrite your current settings. Deselect this option if you have configured your

own DVI devices settings.

Select "Load Audio Settings" and all settings regarding audio will be loaded from this Setup. This

can overwrite your current settings. Deselect this option, if you wish to keep your own audio

settings.

3.13 Fixture Editor

LED fixtures are implemented using the MADRIX Fixture Editor. The fixtures are stored in the

MADRIX Fixture Library (madrix.mfl).

The Fixture Editor is automatically installed together with MADRIX. You can access the tool or its

documentation by calling up the shortcut in the Windows Start Menu or in the MADRIX installation

directory.