User manual

MADRIX Help and Manual249

You can define the colors for the equalizer by clicking at the "Colors"

button. By activating the "Monochrome" button the equalizer will be displayed in white color. If

you activate the "Band" mode button you will get a gradient per band with selected colors.

"View Log" switches to logarithmic rendering of the signals. "Push

HF" (push higher frequencies) modifies the height of higher tonalities, i.e. amplifies their outline.

Depending on the kind of music as well as its volume, we suggest to try what fits best.

Alter the starting point of the equalizer by using the direction arrows. If the

arrow key "Up" is used, low frequencies are display to the left and high frequencies are displayed

to the right.

There are several other modes included, such as "Invert" and "Mirror", to be able to modify the

appearance of the effect further.

These two mode buttons allow you to control the direction of the effect from

outside to center or vice versa. They activate a doubled equalizer at the same time.

Use this button to select one of five different modes: "Bar" is selected by

default. It is the common way of displaying an equalizer. "Radial" transforms the equalizer graph

into a radial shape, which is outlined. "Radial Line" does not include this outline, while "Radial

Outline" displays nothing but this outline. "Radial Dot" uses dots to outline the radial equalizer.

Using the Tap Button for Manual BPM Input