User manual

MADRIX Help and Manual255

These two buttons decide if lines should be displayed in horizontal or vertical order.

This button enables horizontal and vertical lines to be shown at the same time, i.e.

crossed.

You can use the "Amplify" function as a visual amplifier of the audio signal. Values will be

displayed more intensely as a result. The more you move the fader to the right, the stronger will

be the visual amplification of single signals.

"Bands" determines the number of equalizer bands shown. If you have a matrix size with 50 x 50

pixels for example, you can make use of a 50-band equalizer at maximum. Additionally, you may

"Invert" or "Mirror" the effect.

If you have activated "Use Level (db)", this effect illustrates the (volume) level

of the music and its frequencies. MADRIX uses the color that has been selected by you, when a

certain level in the music has been reached.

Using the Tap Button for Manual BPM Input

The effect includes a special function for setting BPM manually. If you want to attain

synchronous movements of effects to the beat of the music, press the "Tap" button. Press this

button at least four times in a row according to the beat of the music (1/4 notes). MADRIX will

calculate the BPM value subsequently.