User manual

MADRIX Effects 260
© 2011 inoage GmbH
For setting up colors simply press the "Color Table" button.
"BPM" sets up the speed with which the effect is displayed and updated. If you would like to
have slow movements (updates) move the fader to the left, or put in low numerical values. Values
in a range from 1 to 9999 are supported. If you move the fade to the right, the update speed
increases and the band moves faster.
You can use the "Amplify" function as a visual amplifier of the audio signal. Values will be
displayed more intensely as a result. The more you move the fader to the right, the stronger will
be the visual amplification of single signals.
The "View Log" button switches to logarithmic rendering of the signals. Depending on the kind of
music as well as its volume, we suggest to try what fits best.
In the "Bands" area you can set the number of the bands for this effect. Maximum is 2 since only
the left and right audio channel are included.
Alter the starting point of the equalizer by using the direction arrows. There are several other
modes included, such as inversion, to be able to modify the appearance of the effect further.
Using the Tap Button for Manual BPM Input
The effect includes a special function for setting BPM manually. If you want to attain
synchronous movements of effects to the beat of the music, press the "Tap" button. Press this
button at least four times in a row according to the beat of the music (1/4 notes). MADRIX will
calculate the BPM value subsequently.