User manual

MADRIX Help and Manual263

The S2L Waveform refers to the

stereo or mono level of the music and

produces a moving waveform.

Use the "Time Slot" to change the

movement speed. Move the fader to

the right, the update rate decreases

and the effect will run slower. Values

lower than 1 are also possible.

Using the color control: Select and hold a

color (using the small square button) and move the mouse if you want to relocate a color. Click

the small x-button at the bottom of a color to remove it. Click inside the large colored area to

create a new color at this particular position with the particular color you picked. Simply drag and

drop it afterwards to change its position. Use the input field "Position" to adjust it more precisely.

The "Alpha value" sets the opacity of a single color. The color becomes transparent

and blends with the background.

This control box allows you to set up the audio analysis mode. You can select

between mono, stereo, left and right audio channel. If you select stereo, you will see two

graphs. One graph will only be displayed using one of the other three modes.