User manual

MADRIX Effects 278

These arrow buttons define the direction and starting point of an effect. Press the

downward arrow if you want the gradient to move from top to bottom. Press the upward arrow if

you want the gradient to move from bottom to top. The cross in the middle activates a movement

from two, opposite directions. The gradient may also move inside out or vice versa. Additionally,

several other options (horizontal, vertical, rectangle, square, ellipse, circle, in implode or explode

mode) are available.

"BPM" sets up the speed with which the effect is displayed and updated. If you would like to

have slow movements (updates) move the fader to the left, or put in low numerical values. Values

in a range from 1 to 9999 are supported. If you move the fade to the right, the update speed

increases and the effect moves faster.

Using the Tap Button for Manual BPM Input

The effect includes a special function for setting BPM manually. If you want to attain

synchronous movements of effects to the beat of the music, press the "Tap" button. Press this

button at least four times in a row according to the beat of the music (1/4 notes). MADRIX will

calculate the BPM value subsequently.