User manual

MADRIX Help and Manual283
© 2011 inoage GmbH
This Music2Light single tone effect impressively
shows single tones of the track.
The MADRIX music analysis uses the following
criteria: number of single tones and tone pitch.
Simply set up a color in which the drops should be
rendered. You can also generate random colors or
use them in shuffle mode.
"Fade (BPM)" sets up the speed with which the effect is displayed and updated. If you would like
to have slow movements (updates) move the fader to the left, or put in low numerical values.
Values in a range from 1 to 9999 are supported. If you move the fade to the right, the update
speed increases and the effect moves faster.
"Sensitivity" controls the sensitivity of the audio analysis. It works like an audio filter. The more
you move the fader to the right, the less drops will be displayed. The sensitivity will increase and
only the most important analytical data will be used. The numerical values for Sens have to be in
the area from 0 – 100.
"Width" decides over the width of objects. An input value of 1 corresponds to 1 pixel for one
tube. Larger numbers mean more larger objects for a single tone.
"Pitch" allows to adjust the spacing between objects. "Border" defines if objects are rendered
with an additional border, which makes them appear bigger.