User manual

OUTPUT 310

7.1 Art-Net

Introduction

Before you start and in order to be able to use Art-Net, please set up your network card in

Windows using the following address area:

2.0.0.1 ... 2.255.255.254 or

10.0.0.1 ... 10.255.255.254

Artistic Licence (the creators of Art-Net) recommends to use 2.x.x.x (10.x.x.x is

regarded to be an alternative). The subnet mask should be 255.0.0.0 You must use this

address area. Otherwise Art-Net might not work.