User manual

OUTPUT 312
© 2011 inoage GmbH
Configuration
Open the "Device Manager" ("F4" or go to "Preferences") and select the tab "Art-Net".
The menu will allow you to configure Art-Net interfaces and other Art-Net settings.
If you want to use Art-Net with MADRIX you have to enable it here first. Check the box next
to "Art-Net" in the upper left corner.
If you have Art-Net enabled, you will see an "Art-Net Remote" device shown in the list. This
device is solely for controlling MADRIX remotely. Please read the information about Remote Control
for further information.