User manual

OUTPUT 322
© 2011 inoage GmbH
7.1.1 Using EUROLITE Node 8 With MADRIX
Introduction
The EUROLITE Node 8 fully supports the Art-Net protocol. It can be configured to output anything
between 1 and 8 DMX universes.
How Do I Configure The EUROLITE Node 8?
IP Address in Windows
You have to set up your computer's IP address to 2.0.0.1 and the subnet mask to
255.0.0.0.
DMX Port Settings
To configure the EUROLITE Node 8 to output 8 universes of DMX, follow the next steps.
Push the control wheel at your EUROLITE Node 8 once and select "DMX port 1".
- the option Port must be set to "output"
- the option Universe must be set to "Art-Net 0.0"
- the option Rate must be set to "Sync"
- the option Hold must be set to "Always"
Now, select the option "Save" to save your settings.
Repeat the steps above for "DMX port 2", "DMX port 3", "DMX port 4", "DMX port 5", "DMX
port 6", "DMX port 7" and "DMX port 8" according to the following table:
DMX
Port
Universe
Rate
Hold
DMX port 1
output
Art-Net 0.0
Sync
Always