User manual

OUTPUT 324

In order to configure MADRIX, go to the MADRIX menu "Preferences -> Device Manager".

Select the "Art-Net" tab.

You can enable Art-Net by activating the checkbox next to the label "Art-Net" in the upper left

corner. The small box will light up green.

Next, press the button "Find Auto". After a few seconds your EUROLITE Node 8 is configured

automatically and will be shown in the list.

If you have connected one EUROLITE Node 8, you will see two entries. Each entry has 4 ports

(universes).

In the next step open the tab called "DMX Devices". Here, you have to enable each device.