User manual

Getting Started 32

The "M2L Cleaner" allows to use a cleaner music analysis for M2L effects. Small numerical

numbers correspond to a slight cleaning. With that also wrong results in the audio analysis are

shown. Move the fader to the right or put in high numerical values and you will see clean results.

"M2L Sensibility" controls the sensitivity of the music analysis for M2L effects. It works like an

audio filter. The more you move the fader to the right, the less will be displayed. The sensitivity

will increase and only the most important analytical data will be used. The numerical values for

Sensibility have to be in the area from 0 – 100.

A fast computer will deliver better results than a slow computer regarding the audio analysis.

Please pay attention to the system requirements of MADRIX and to the processor load while

running the software. A sound card with ASIO is a big improvement as well.

Please note: With some effects in MADRIX, and with some types of music as well, it is

sometimes useful to move the fader a little bit to the left, even if your PC is fast enough.

1.9 Supported Sound Cards

The selected audio signal is being scanned and analyzed using functions

of Microsoft DirectX®. If your sound card does not process and deliver requested data fast

enough, problems with the sound analysis are likely to occur.

If you are having problems with the audio analysis, we suggest:

Check if you have clicked the "Audio" button, and if the "Audio" button is activated.

Check the Windows recording settings using the mixer control for your recording device.

Check the installation of drivers of your sound card as well as the installation of the Microsoft

DirectX®-version.