User manual

OUTPUT 334
© 2011 inoage GmbH
In the next step open the tab called "DMX Devices". Here, you have to enable each Art-Net
device by activating the "Enable" switch. You will also have to assign the DMX universe.
In this example we have used all 8 ports of the Datagate and activated them for
output.
Datagate #1A Port:0 is the DMX universe 1
Datagate #1A Port:1 is the DMX universe 2
...
...
Datagate #1B Port:3 is the last DMX universe 8
Important Notes
For more information please consult the chapter Art-Net.