User manual

MADRIX Help and Manual335
© 2011 inoage GmbH
7.1.3 Using X-NET 8 With MADRIX
Introduction
The X-NET 8 fully supports the Art-Net protocol. It can be configured to output anything between
1 and 8 DMX universes.
How Do I Configure The X-NET 8 Using Art-Net?
1) You have to set up your computer's IP address to 2.0.0.1 and the subnet mask to
255.0.0.0.
2) X-NET 8 Back Panel View:
Set up the IP address of your X-NET 8 from 2.39.2.1 to 2.39.2.255 using the SW1, SW2,
and SW3 switches.
Back Panel Switches:
SW1: x100
SW2: x10
SW3: x1
Set up an IP address other than your computer's network card.
Examples:
2.39.2.10: you have to set the SW1 to 0, SW2 to 1, and SW3 to 0
2.39.2.127: you have to set the SW1 to 1, SW2 to 2, and SW3 to 7
2.39.2.231: you have to set the SW1 to 2, SW2 to 3, and SW3 to 1
...
Each X-NET 8 must have its own, unique IP address.
Example:
1st X-NET 8 ... 2.39.2.1
2nd X-NET 8 ... 2.39.2.2
3rd X-NET 8 ... 2.39.2.3
...