User manual

MADRIX Help and Manual339

Select "Use Direct IP Mode For the Devices" if you wish to use Direct IP mode. For more

information see the chapter Art-Net.

Select "Device Sends Full Frames" if you wish to always send a single frame including all 512

DMX channels. If this option is disabled, MADRIX will automatically send optimized frames that

reduce network traffic. If problems occur with your Art-Net node, please enable this option and

send full frames.

Select a device and press "Edit" to configure this Art-Net device.

Here you can set up your Art-Net device. First, please click on "Port Count" and select the Port

Count to be "4 0x4".

Up to this point we have used the broadcast option.