User manual

OUTPUT 344
© 2011 inoage GmbH
In the next step open the tab called "DMX Devices". Here, you have to enable each Art-Net
device by activating the "Enable" switch. You will also have to assign the DMX universe for
each port.
In this example we have used all 8 ports of the X-NET 8 and activated them for
output.
First X-Net 8:
X-NET 8 #1A Port:0 is the DMX universe 1
X-NET 8 #1A Port:1 is the DMX universe 2
...
...
X-NET 8 #1B Port:3 is the last DMX universe 8.
If you have more than one X-NET 8, configure the subsequent X-NET 8 devices in the same
way.