User manual

OUTPUT 354

"Display Area" specifies what is shown in the DVI window. Activate "Full Size" and your full

matrix will be displayed. Or you can select a certain cut-out and specify which details of your

matrix will be shown. You can choose the start coordinates and the end coordinates of this area.

"Left:" and "Top:" define the start coordinates in a coordinate system that starts with 0,0 in the

top left corner. "Right:" and "Bottom:" define the end coordinates. The end coordinates cannot

be higher than the full size of the matrix. For example, for a matrix with 50x50 pixels, the maximum

value of "Right:" and "Bottom:" is 50.

"Display Rotation" allows you to rotate the DVI preview window by 90 degrees, 180 degrees, or

270 degrees clock-wise. This rotation applies to the "Display Area".

"Window Size" determines the actual size of the DVI window. Activate "Display Area Size" to

set the size of the window to the pixel count of the display area, which determines what is shown

of your matrix. Using different values than the size of the display area will stretch or compress the

content.

Please press "Apply" to activate the changes you have made.

The standard configuration of these "DVI Window Settings" includes an activated "Display

Area Size" and activated "Full Size". These settings represent a standard 1:1 DVI window.

Lock Position

You can lock this window at a particular position. Right-click and choose "Lock Position" from the

context menu.

Always On Top

If you want the window to be in the front of all windows at all times, activate the entry "Always

On Top".

Use Background Image...

Only applies to "Window" and "Fullscreen" mode.

DVI, Window, Fullscreen

"DVI" activates the borderless DVI Window. "Window" activates the framed DVI window.

"Fullscreen" activates DVI output in fullscreen mode.